FFT Spectrum Analyzers

by ZETLAB Company

FFT spectrum analyzers are supplied with various application software and hardware configurations, thus, providing you with turnkey solutions for vibration, acoustic and hydroacoustic measurements.

Using a single FFT Spectrum Analyzer, it is possible to develop multiple-task hardware systems that are perfectly suitable for testing procedures, as well as for process control monitoring.

A wide range of FFT Spectrum Analyzer design variants (portable, industrial, underwater etc.) and PC-connection interfaces allow to use the FFT spectrum analyzer in various systems, such as stationary, mobile, standalone, industrial, distributed and dynamic; the FFT Spectrum Analyzers show unmatched reliability in various environments and have a wide applicational range.

Measuring systems based on FFT Spectrum analyzers of ZET 017 series enable over 100 implementations of algorithms used in the sphere of vibration and sound data processing, including spectral analysis (narrow-band spectral analysis, fractional-octave spectral analysis, wavelet analysis, etc.), correlational and modal analysis, evaluation of transfer characteristics, Nyquist diagrams and over 1000 software products covering all possible spheres of vibroacoustic analysis.

Types of connected transducers

Primary transducers (accelerometers, hydrophones, microphones, RPM sensors, etc.) and FFT Spectrum analyzers by ZETLAB Company are used for vibrational, acoustic and hydroacoustic measurements as well as for diagnostics and balancing of rotating mechanisms and gear drives.

FFT spectrum analyzers - microphones

Microphones

Basic functions

FFT spectrum analyzers - main page - FFT analysis

FFT-Analysis

This type of analysis is frequently applied for Vibro-acoustic analysis of various electric drive mechanisms, since it ensures the best frequency resolution, enabling to highlight tones, detect harmonics and structural resonances.

Spectral analysis of the octave band

Constant Percentage Bandwidth (Fractional-Octave Analysis)

Standard analysis types implementing digital filters based on fractional octaves: 1/3-, 1/12- and 1/24-octave bandwidth for machinery vibration monitoring, noise analysis, and sound intensity level evaluation.

Rotor-balancing-and-gear-units-testing-cover-1

Rotor Balancing and Gear Unit Testing

Tensions and strains occurring in rotary and reciprocating mechanisms can cause forced vibrations accompanied by undesirable noises.
Order analysis is one of the most convenient and efficient testing methods for balancing rotary mechanisms and gear units.

Modal analysis-program interface - main cover

Modal Analysis and Resonance Detection

This type of analysis is applied for processing and visual representation of vibration signals and vibration signal spectra; modal analysis is perfectly suitable for automatic detection of resonance, phases; as well as peak amplitude ratio and damping ratio of mechanisms, parts, constructions and other objects by the free-oscillation method at shock excitation.

Cross-correlation analysis - reverberation - cover

Reverberation 

This method is applied for detection and localization of high-intensity noise sources in complicated mechanisms, or for measuring reverberation time in the course of designing of chamber music halls that are supposed to have certain reverberation time for optimal performance.

Wavelet analysis - speech recognition systems - cover

Speech Recognition 

The wavelet analysis is implemented for the tasks related to speech processing and recognition.
Wavelet-transform allows to implement recognition method of the distorted phonemes and teach the right articulation to the people with congenital deafness.

Noise and vibration measurements - programs for FFT Spectrum analyzers - cover

Noise and Vibration Measurement 

Noise measuring procedures are carried out according to the requirements of IEC 61672-1:2002.

Nyquist diagram - software for FFT Spectrum analyzers - cover

Nyquist Diagram

Frequency response in complex mechanisms.
In the diagram, the amplitude/frequency and phase/frequency characteristics are combined.

Transfer Characteristics and Frequency Response

Transfer Characteristics and Frequency Response. 

Frequency response evaluation of constant, alternating or selective value of a signal in logarithmic or linear scale.

Signal Recording

Signal Recording 

Processing of signals from the input channels of FFT Spectrum Analyzers can be conducted both in the real-time mode and in the playback mode. Signals can be recorded simultaneously by several channels (from 2 to 128).

Automation - software for FFT spectrum analyzers - cover

Automation

“Formula”  and “Signals filtering” programs from the basic scope of ZETLAB Software package enable on-line creation of any signals without any measuring and control instruments connected to the FFT spectrum analyzers. Joint implementation of these programs provides the user with a powerful virtual instrument similar to the programming environment MATLAB!

Pb_free
Directive 2011/65/EU (ROHS, ROHS II)

Dynamic Signal Analyzers conform to the requirements of the Directive 2011/65/EU (ROHS, ROHS II) on the restriction of the use of certain hazardous substances (Pb, Hg, Cd, Cr(VI)) in electrical and electronic equipment and manufactured in conformity with the lead-free technology, according to the EU requirements.

RoHS-Comliance

Based on ZETLAB multi-channel FFT Spectrum Analyzers and powerful graphical programming environment SCADA ZETVIEW you can create and combine unique virtual tools, measuring systems, automated WS and testing workbenches.

SCADA ZETVIEW has been designed to simplify complex working processes. For this purpose, the system is equipped with a wide range of components enabling project construction of any complexity level.

SCADA ZETVIEW  is perfectly suitable for designing of completely autonomous projects that can conduct measurements in standalone mode, for analysis procedures, project control and presentation of results. That is why all you need is to start the project, the rest will be done by the system.

SCADA ZETVIEW - example of system implementation