Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

  • DC or AC to power the sensors
  • Integrated amplifier
  • 8 measuring channels

POR (price on request)

Specifications

of Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

Technical Specifications
Analog Input (ADC)
Analog inputs 8
ADC resolution 24 bits
Frequency ranges DC…2, DC…20, DC…200, DC…2 000, DC…20 000 Hz
Sample rate per channel 50 kHz
Maximum input voltage (G=1) ±10 V
Programmable gains 1, 10, 100
Common-mode voltage range ±9,5 V
Analog Output (DAC)
Analog outputs 1
Sinewave frequency range 0,03… 25 000 Hz
Output impedance 50 Ω
Maximum output current 20 mA
DAC resolution 16 bits
Maximum output voltage ±10 V
Digital Input/Output
Digital input 8 bits
Digital output 8 bits
External trigger input TTL
Metrological Characteristics
Analog Input (ADC)
Dynamic range 130 dB
Non-flatness of channels` frequency response 0,1 %
Interchannel phase difference 1° per 10 kHz
Displayed average noise level to input level (G=max)
Analog output (DAC)
Frequency range uncertainty (3…25 000 Hz) ±0,1 %
Frequency range uncertainty (0,03…3 Hz) ±10 %
AC/DC output voltage uncertainty range ±(0,2 % + 2 mV)
Sine-wave signal`s harmonic distortion coefficient 0,1 %
General Specifications
Dimensions 280 × 160 × 75 mm
Weight 0,8 kg
Resistance to electromagnetic fields Up to 400 A/m
Ingress Protection IP68
Capability to synchronize with other strain gauge modules Yes
Non-volatile data storage capacity (flash-drive)* Up to 32 Gb
Flash-drive recording sample rate* 50 kHz
Flash-drive peak write speed* 10,8 hours
Data transfer speed via Highspeed USB 2.0 480 Mbps
Data transfer speed via Ethernet * 100 Mbps

* Options

Advantages

of Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

Calibration

signal conversion according to calibration tables

Strain Gauge Amplifier

integrated strain-gauge amplifier for strain-gauge sensors

Signal generation

various forms, amplitude and frequency available

High Accuracy

of measurements, signal and virtual channel analysis

Offline Operation

(does not require a PC) of the signal recorder (up to 32 Gb)

Simultaneous

sampling of all the channels (parallel analysis)

PURPOSE

of Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

Strain gauge data collection system ZET 017-T8 is designed for performing parallel strain gauge measurements on multiple channels. The instrument has high-precision measurements and signals recording accuracy. There are different options for PC connection, as well as for standalone operation.

Sensor connection

  • resistive strain gauges can be connected via bridge and half-bridge circuits;
  • sensors powered with DC or AC voltage;
  • measuring channels individual or parallel calibration;
  • integrated strain-gauge amplifier for strain-gauge sensors.

BASIC FUNCTIONS

of Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

DC or AC

power supply for sensors and bridge circuits

Automation

instrument control based on feedback signals from sensors

Measurements

with the Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

ZET 017-T8 Measurement module for strain gauges (Data Acquisition Module (DAQ) is supplied with ZETLAB TENZO software, thus enabling all types of strain gauge measurements with the use of strain gauge sensors  (force sensors, torque sensors, bridge and half-bridge schemes on resistive strain gauges).

An integrated generator can be used for power supply.

Measurement-module-for-strain-gauges-Data-acquisition-module-DAC-ZET-017-T8-Strain-gauge-meter-program-ZETLAB-Software
ce1-80x80
CE

This Product by ZETLAB Company has EU-type examination Certificate

ce2-725x1030

Basic Configuration

of Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8

Basic delivery scope of Measurement module for strain gauges (data acquisition module (DAQ) ZET 017-T8
  • Measurement module for strain gauges (Data Acquisition Module (DAQ) ZET 017-T8,
  • power supply module, cable USB 2.0, Ethernet cable,
  • terminal block miniXLR 92M-502(5P),
  • cable BNC-miniXLR 92M-502(5P),
  • plug 50 Ohm,
  • cable connector BNC-BNC,
  • CD with ZETLAB TENZO Software,
  • option “Ethernet 10/100 interface”,
  • operational documentation,
  • bag for storage and transportation.

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).