Synchronous generator ZET 7090

  • Analog two-channel synchronous generator
  • Random shape signals forming
  • RS-485 data transfer interface

POR (price on request)

* Minimum order value: from 7 700 USD

Specifications

of Synchronous generator ZET 7090

Technical specifications
Number of channels 2 cophasal
1 differential
Signal shapes sinus, square, triangle, saw-tooth shape signal
Output signal range:
Mode«0…5»
Mode«±2,5»
0…5 V;
-2,5…2,5 V
Maximum signal frequency 25 kHz
Minimal step width at frequency 0,1 Hz
Data inerface RS-485
Data rate 4800, 9600, 14400, 19200, 38400, 57600, 115200 bit/s
Parity control 0 – no control, 1 – control (oddity, ODD)
Data communications protocol Modbus RTU
Operational parameters
Dimensions 71×39×17 mm
Weight 30 g
Device power 9 – 24 V
Current consumption at voltage 12 V up to 40 mA
Polarity reversal protection yes
Temperature operational rage from -40 to +80 °С
Electromagnetic compatibility EMC
MEK 61000-4-2 (IEC 61000-4-2), ESD contact 4 kV, air 8 kV
MEK 61000-4-4 (IEC 61000-4-4), EFT power 0,5 kV, signal 0,25 kV
MEK 61000-4-5 (IEC 61000-4-5), Surge 500 V
  • Product versions

    Standard: laboratory version (green plastic casing)
    ОЕМ: compound coating
    Industrial*: standard module placed into leak-proof casing with transparent cover
    *Option

Pb_free
Directive 2011/65/EU (ROHS, ROHS II)

SYNCHRONOUS GENERATORS MEET THE REQUIREMENTS OF DIRECTIVE 2011/65/EU (ROHS, ROHS II) CONCERNING LIMITATION TO USE HAZARD SUBSTANCES (PB, HG, CD, CR(VI)) IN ELECTRICAL AND ELECTRONIC EQUIPMENT; THEY ARE MANUFACTURED USING LEAD-FREE METHOD, IN COMPLIANCE WITH THE EUROPEAN COMMUNITY REQUIREMENTS

RoHS-Comliance

Function

of Synchronous generator ZET 7090

Synchronous generator ZET 7090 is used for  signal forming of sinus, implulse and saw-tooth shapes and has 2 synchronous channels. Generators can be used independently or within automation and control systems.

Output channels control is performed by means of ZETLAB software or any other software using Modbus protocol.

Application spheres

of Synchronous generator ZET 7090

  • Control

    of heating elements

  • Measuring equipment calibration

    seismic stations, noise- and vibration meters and other measuring equipment calibration

  • Frequency response control

    by means of measuring modules – frequency response control with feedback communication

  • Vibration sensors and seismic recorders calibration

    by electrical method (in-place calibration) or by comparison method (vibration impact by means of shaker system)

Measuring network connection scheme

of Synchronous generator ZET 7090

In order to connect synchronous generator  ZET 7090 to ZETLAB and ZETVIEW systems one can use interface converter ZET 7070. Number of control modules connected to the interface converter ZET 7070 in the case if integrated power supply module ZET 7070 is used is maximum 4, in the case of external power supply module use – up to 60.

ZETLAB software enables connection of up to 1024 modules to a single PC. The control modules can also be connected to any system using Modbus protocol via interface RS-485.

Designation of connection pins for signal output

Labelling Marking Designation
1 OUT1 Generator channel 1
2 OUT2 Generator channel 2
3 +2,5 V Base level
4 GND General

Connection pin designation for the connection to the network RS-485

Contact Designation Labelling
1 +(9…24) V Orange
2 RS-485 line «B» or «DATA-» Blue
3 RS-485 line «A» or «DATA+» White-blue
4 GND White-orange
sinfaznoe_podkluchenie_7090

Cophasal connection of the output signal

in relation to the “ground”

differencialno_podkluchenie_7090

Differential connection of the output channels
in relation to the reference signal 2,5 V

Basic configuration

of Synchronous generator ZET 7090

Вариант базовой комплектации

Basic configuration of synchronous generators includes:

  • Synchronous generator ZET 7090;
  • DIN-rail mounting panel for plastic modules 71×39;
  • set of operational documentation.

POR (price on request)

* Minimum order value: from 7 700 USD

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).

Necessary measuring equipment

supplied upon special order

Преобразователь интерфейса ZET 7076 Ethernet/Wi-Fi ↔ RS-485
ZET 7076 interface converter
Ethernet connection

Корпус для защиты от влаги и пыли
Industrial version
Dust and moist protective casing