ZET 230 ADC DAC module

  • Analog input (ADC):  24 bit
  • Total conversion frequency up to 100 kHz
  • Analog input (DAC):  16 bit
  • Total conversion frequency up to 100 kHz

From 982 USD

Specifications

of ZET 230 ADC DAC modules

Analog input (ADC)
Number of inputs 4 in-phase
4 differential
ADC – number of digits 24
Total frequency conversion by active channels from 1 kHz up to 100 kHz
Dynamic range 100 dB
Max FR uneveness in the range 10 Hz…20 kHz 1 dB
Max input voltage ±10 V
Input impedance 100 kOhm
Inputs protection (power on) ±30 V
Inputs protection (power off) ±30 V
Inter-channel interference -90 dB
Input capacitance 20 pF
Analog output (DAC)
Number of outputs 4 inphase
4 differential
Total conversion frequency of active channels up to 100 kHz
Max output value ±10 V
DAC: number of digits 24
Digital input/ output
Bits number per input/output 8 bit
FIFO-buffer 16 Kwords
Digital input/output logic type TTL
Operational specification
Dimensions 90 × 110 × 35 mm
Weight 0,3 kg
Analog input/output connector type (mating connector is included into the delivery scope) DSUB DB-25
Digital input/output connector type (mating connector is included into the delivery scope) DSUB DB-9
Data recording speed to PC in real-time mode (via Ethernet) (for 1 channel)* 100 measurements per sec
Nonvolatile memory volume (integrated flash storage media)** up to 2 Gb
Total sampling frequency for all the channels** 100 kHz
Data recording speed to a Flash-drive in real-time mode (for 1 channel)** 100 measurements per sec

* Option «Ethernet interface 10/100».
** Option «Off-line recorder».

Advantages

of ZET 230 ADC DAC modules

MULTI-FUNCTIONAL APPLICATION

deployment of multi-channel distributed systems

simplification of automated systems development

COST-EFFECTIVE SOLUTION

reduction of costs for new developments

PARALLEL DATA ACQUISITION

by means of several modules integration

OFF-LINE OPERATION MODE

digital processing of  signals with their subsequent record to the flash drive (without PC)

WIDE RANGE OF POSSIBLE APPLICATIONS

(field use, measurements performance at structural elements)

COMPACT DIMENSIONS

portable laboratory

Functions

of ZET 230 ADC DAC modules

ZET 230 ADC DAC module is used for high-precision signal measurements in wide dynamic and frequency range. The module has an integrated anti-aliasing filters for 25 kHz. ZET 230 ADC DAC module is not designed for digital processing of constant level signals.

ZETLAB BASE Software delivered together with ZET 230 modules enables measurements and control performance immediately as the PC connection is established. ZETLAB BASE Software includes all the programs necessary for tests and measurements by several channels, control of the measured values and current parameters transfer to PC.

Main functions

of ZET 230 ADC DAC modules

VISUAL REPRESENTATION

Signals shape representation

Arbitrary waveform

generation

NETWORK

Signals receipt and transfer by network

Structural scheme

of ZET 230 ADC DAC modules

The block diagram of the ADC-DAC module

4-channel multiplexer sequentially commutates all the selected channels to a single operational amplifier at equal time intervals. As the channels are switched over, the signal processor produces a command to start ADC conversion. As the conversion is over, the ADC forms ready flag and signal processor operation is suspended. ADC module is based on sigma-delta ADC of sound frequency and has even FR characteristics at the transmission band.

Signal processor saves the data to the integrated memory of the device for its further transfer to USB controller, via Ethernet or for the purpose of recording it to a flash-drive. The data from integrated memory of the signal processor is forwarded to 4 independent DAC converters. DAC output signal is formed by operational amplifiers. At the moment of module’s activation (i.e. power-up), there is performed ADC autocalibration and the current readings by constant value are set as zero value.

Basic delivery scope

of ZET 230 ADC DAC modules

Basic configuration of ADC DAC modules

ZET 230 ADC DAC module delivery scope includes:

  • ZET 230 ADC DAC module;
  • HighSpeed USB 2.0 cable;
  • terminal board;
  • DB-9 and DB-25  (mating connections);
  • CD with drivers and ZETLAB BASE Software;
  • set of operational documentation;
  • galvanic separation unit of analog inputs/ outputs from PC casing (400 V).

Additional options

for ZET 230 ADC DAC modules

Signal amplifier ZET 410
ZET 410
Signal amplifier without galvanic separation

Signal amplifier with pseudo galvanic
ZET 412
Signal amplifier with galvanic separation

Battery pack
Batteries module
Set of 5 V batteries (2700 mAh – 4 pcs.)

Autonomous recorder and flash drive
Off-line recorder
Digital off-line recorder

Multichannel distributed data collection system
Distributed data acquisition system

Recording and playback facilities
Data recording and representation
Software programs for data recording and representation

scada system ZETLAB
SCADA ZETVIEW
SCADA-project for technological processes automated control

Software Developer Tools
ZETLAB STUDIO
Development environment for virtual tools creation

Power Supply
Power supply module 220 V → 5 V
For modules power-supply in off-line mode of operation


Interface Ethernet 10/100
Software for PC Ethernet connection

Power supply via Ethernet
Power supply via Ethernet
Power supply via Ethernet at the distance up to 100 m


WI-FI interface

Set of modules, cables and interconnectors for data transfer via wireless WiFi connection

ZET 230 ADC DAC modules

quick start

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).