Process Management In Test Chambers
ZET 017-T8 measuring and control modules are used for process management in test chambers environment. The test systems can also be established based on ZETSENSOR digital sensors and controllers. There are different types of tests, which mainly include the following impacts:
- salt mist;
- thermal shock.
Modern test chambers enable performing mechanical tests simultaneously with climatic testing, e.g for checking the vibration impact. All types of tests are controlled using hardware and software developed by our Company.
The multi-channel monitoring of all the relevant processes can be performed in parallel with the test process management, since our versatile equipment enables connection of various primary transducers.
You may wonder what to choose as a measuring and control device: ZET 017-T8 strain gauge module or ZETSENSOR module-based system? The answer depends on your particular testing needs.
Using ZET 017-T8 Strain Gauge Station
The tests are managed via PC automatically. Eight measuring channels allow to connect eight sensors, and the integrated generator powers the sensors. The climatic chamber is controlled by a digital port of the strain gauge module, the test parameters are specified in the Regulator program included into ZETLAB TENSO software package. ZET 017-T8 measuring module is included into the State Register of Measuring Instruments.
Climatic Testing Management System Based On ZETSENSOR
If there are a lot of parameters, it is reasonable to use solution based on digital sensors and ZETSENSOR control modules. For each of the parameters there is assigned a combination of sensor and a measuring module. The system also includes controllers and modules for connection to the PC. Digital sensors are also included into the State Register of Measuring Instruments.