A19-U2 FFT spectrum analyzer

  • Dynamic range 96/106/116/126 dB
  • Frequency range up to 200 kHz
  • Integrated generator

POR (price on request)

Specifications

of A19-U2 FFT spectrum analyzer

Technical Specifications
Analog Input (ADC)
Voltage and IEPE analog inputs 2
ADC bits 24
Frequency ranges of simultaneously analyzed signals DC…10, DC…100, DC…1 000, DC…10 000, DC…100 000, DC…200 000 Hz
Conversion frequency by each channel up to 250 kHz
LPF filters implemented with 120 dB/octave Butterworth digital filters for sampling frequencies 50 Hz, 500 Hz, 5 kHz, 50 kHz
Maximum input voltage at a unity gain ±10 V
Programmable gains 1, 10, 100
Analog Output (DAC)
Analog outputs 1
Range of frequencies of generated sinusoidal signal 0,03…200,000 Hz
Output impedance 50 Ohm
Maximum output current 20 mA
DAC bits 16
Maximum output voltage ±10 V
Digital Input/Output
Digital Input 8 bit
Digital Output 8 bit
Type of digital input/output logic TTL
Metrological Performance
Analog Input (ADC)
Dynamic range  up to 100 Hz frequency range 126 dB
Dynamic range  up to 1 kHz frequency range 116 dB
Dynamic range  up to 10 kHz frequency range 106 dB
Dynamic range  up to 100 kHz frequency range 96 dB
Bandwidth channel simularity 0,1 %
Interchannel phase difference 1° per 10 kHz
Intrinsic noise rate throughout the bandwidth at maximum gain scaled to input 7 µV
Analog Output (DAC)
Maximum tolerable relative error of frequency setting for 3…200,000 Hz range ±0,1 %
Maximum permissible relative error of frequency setting for 0.03…3 Hz range ±10 %
Limits of permissible error of direct and alternating output voltage setting ± (0.2% + 2 mV)
Harmonic distortion factor of generated sinusoidal signal 0.1 %
Operational Performance
Dimensions 180 × 115 × 35 mm
Weight 1 kg
Supported sensors – types: ICP (IEPE), DeltaTron, ISOTRON
External clock and run on digital socket Yes
Non-volatile storage (internal flash drive)* up to 8 Gb
Sampling frequency of flash drive write on the channel* 250 kHz
Flash drive write time on all channels at maximum frequency* 11 h
Transmission speed via HighSpeed USB 2.0 bus 480 Mbps
Transmission speed via Ethernet bus* 100 Mbps

* Optional

Advantages

of A19-U2 FFT spectrum analyzer

High precision

of sound range measuring and analysis

Bandpass filters

In accordance with IEC 61260

Signal generation

with pre-set parameters (sinus, impulse, random)

ICP (IEPE) amplifier

for connection of sensors with integrated electronics

Standalone operation

in field environment

Small Weight and Compact Dimensions

enable operation in remote areas

Description

of A19-U2 FFT spectrum analyzer

FFT spectrum analyzer A19-U2 allows to simultaneously use several programs for analysis and signal mapping. This allows to create various complexes for testing, process monitoring, and control systems.

The combined use of several programs allows to carry out tests in non-stationary modes.

The spectrum analyzers are used for vibration and acoustic measurements, continuous monitoring, machinery diagnostics, test equipment control, adjusting the process parameters, automating acceptance tests, etc.

Different designs (laboratory, portable, industrial, submerged, etc.) and PC interfaces facilitate the use of  FFT spectrum analyzer in stationary, mobile, self-contained, industrial, distributed and dynamic systems in various environmental conditions.

BASIC FUNCTIONS

of A19-U2 FFT spectrum analyzer

Generation

of arbitrary waveforms, amplitudes, and frequencies

Logging

recording and playback

Automation

filtering, formulas, regulators

Networking

data exchange over Ethernet and Internet

Customization

service programs and configuration

Basic Configuration

of A19-U2 FFT spectrum analyzer

Basic configuration of the spectrum analyzer A19 U2

Spectrum analyzer delivery scope includes:

  • A19-U2 FFT spectrum analyzer,
  • power supply module, cable USB 2.0, cable BNC-BNC, Ethernet cable,
  • plug 50 Ohm,
  • option «synchronization by PTP 1588 interface»,
  • option «Ethernet 10/100 interface»,
  • option «ZETLab Studio development tool»,
  • CD with  ZETLAB ANALIZ Software,
  • user manual, operator’s manual,
  • case for storage and transportation.

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).