Interface converter ZET 7174

  • Interface converter USB↔CAN 2.0
  • Digital sensors and controllers power supply
  • Data exchange with PC

From 136 USD

SPECIFICATIONS

Interface converter ZET 7174

SPECIFICATIONS
Functionality interface conversion  CAN 2.0 → USB
PC connection interface USB 2.0
Maximal number of modules connected at a time (In fact, possible number of connected modules depends on data transmission channel loading) up to 32
Maximal sum frequency of data recording 12,000 Hz
Digital measuring module connection interface CAN 2.0
Data exchange rate 100, 300, 1,000 Kbps
PERFORMANCE PARAMETERS
Dimensions 87×50×24 mm
Weight 55 g
Device power 9 to 24 V (or via USB)
Power consumption 1.5 W
Power supply of digital transducers  connected external
Polarity reverse protection available
Operation temperature range -40 to +100 °С
ELECTROMAGNETIC COMPATIBILITY EMC
MEK 61000-4-2 (IEC 61000-4-2), ESD contact 4 kV, air 8 kV
MEK 61000-4-4 (IEC 61000-4-4), EFT power 0.5 kV, signal 0.25 kV
MEK 61000-4-5 (IEC 61000-4-5), Surge 500 V
  • SYNCHRONIZATION

    Can be sync wizard

  • VERSION OPTIONS

    Standard: laboratory version in plastic casing (green).
    ОЕМ: compound-coated plate.
    Industrial*: standard version module placed in sealed casing
    (with transparent cover).
    *Option

OPERATING PRINCIPLES

ZETLAB package includes drivers for ZET 7174 modules. ZETLAB data server detects devices available on CAN-line automatically, reads the name of instrument channel, measurement unit, upper and lower range of parameter permissible values and reads instrument channel data continuously, forming continuous synched channel in ZETLAB environment.

ZETLAB data server scans the line at all accessible addresses, and in case a new device is found it provides dynamic connection of the new channel into the system. When new ZET 7174 device is found, ZETLAB data server also connects all channels live. Thus, the line can be maintained without interruption of work on other channels, i.e. the system permits hot replacement of elements.

DIAGRAM OF ZET 7174 CONNECTION TO INSTRUMENT COMMUNICATIONS NETWORK

ZET  interface converter

Connector to instrument communications network

Designation of connector pin-outs for CAN line connection

CONTACT DESIGNATION COLOUR CODE
1 +(9…24) V Red
2 CAN 2.0 line “H” Blue
3 CAN 2.0 line “L” Green
4 GND Yellow

INSTRUMENT COMMUNICATIONS NETWORK DIAGRAM

Directive 2011/65/EU (ROHS, ROHS II)

INTERFACE CONVERTERS MEET THE REQUIREMENTS OF DIRECTIVE 2011/65/EU (ROHS, ROHS II) CONCERNING LIMITATION TO USE HAZARD SUBSTANCES (PB, HG, CD, CR(VI)) IN ELECTRICAL AND ELECTRONIC EQUIPMENT; THEY ARE MANUFACTURED USING LEAD-FREE METHOD, IN COMPLIANCE WITH THE EUROPEAN COMMUNITY REQUIREMENTS

STANDARD SUPPLY PACKAGE

Возможный вариант комплектации

Interface converter ZET 7174 supply package includes the following:

    • Interface converter ZET 7174;
    • USB cable;
    • Power unit 220V → +24V;
    • ZETKEY — USB device (ZETLAB software activation key);
    • ZETLAB SENSOR software CD;
    • package of documents.

From 136 USD

Additional options

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

ZET 7173
ZET 7173
Off-line recorder

Средства записи и воспроизведения
ZETLAB REGISTRATION
For data recording and displaying

SCADA ZETVIEW
SCADA ZETVIEW
Graphical programming environment