Digital indicator ZET 7178

  • Network power control on the bus
  • Measured parameters  indication
  • CAN 2.0 data interface

POR (price on request)

SPECIFICATIONS

of the Digital indicator ZET 7178

TECHNICAL SPECIFICATIONS
Measured parameter power supply bus voltage
Data output frequency 10 Hz
Data interface CAN 2.0
Data refresh rate on the indicator 1/10, 1, 3, 5, 10 Hz
Peak detector yes
Indicator type graphical, monochrome
Resolution 98×32 pixels
OPERATIONAL SPECIFICATIONS
Dimensions 140×65×32 mm
Weight 250 g
Power supply 9 to 24 V
Current consumed at 12 V voltage up to 130 mA

PURPOSE

of the Digital indicator ZET 7178

The Digital indicator ZET 7178 is intended for indicating the data transmitted via the CAN network by the ZETSENSOR series digital sensors.

The indicator can display up to 10 data channels in sequence. Channels are switched by pressing two buttons. The indication is in the three-line mode:

  • first line: status, it indicates the battery charge level (for systems with 4 lithium batteries), current time in the CAN network;
  • second line: channel name;
  • third line: current indications and the measurement unit.

The channel name and measurement unit are set by the user and can be written using the Latin or the Cyrillic alphabet.

The transducers can be mounted on the controlled object or be placed inside of electrical cabinet together with the interface modules used for data communication purposes. Electrical cabinets by ZETLAB Company are quite compact if compared to the currently available analogs. Among the advantages of ZETSENSOR modules, one should mention easy installation and dismounting as well as the indication of power supply and signal transmission (which considerably simplifies the in-place diagnostics of the system at the controlled object).

CONNECTION DIAGRAM

of the Digital indicator ZET 7178

The digital indicator has a nondetachable cable without a connector on the side for connecting to the measuring network. The cable core marking and diagram for connection to the measurement network are shown in the table below.

Pin assignment for connecting to CAN line

Pin Designation Labelling
1 +(9 ~ 24) V Orange
2 H line of CAN 2.0 Blue
3 L line of CAN 2.0 White-blue
4 GND White-orange

CONFIGURABLE PARAMETERS

of the Digital indicator ZET 7178

The indication is configured with a PC via any CAN ↔ PC interface converter of ZET 717X series (at present, ZET 7174 or ZET 7176).

BACKLIGHT BRIGHTNESS
BACKLIGHT CONTRAST
MULTIPLIER
DEVICE ADDRESS

BASIC CONFIGURATION

of the Digital indicator ZET 7178

Digital indicator ZET 7178 - basic delivery scope

The basic configuration package of the gauge includes:

  • Digital indicator ZET 7178;
  • operation documentation package.

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).

Necessary measuring equipment

supplied upon request

ZET 7174
ZET 7174
Connection via USB

ZET 7176
ZET 7176
Connection via Ethernet