Control module ZET 7160-S
- Used for step engine control
- Types of engines connected: 4-, 3- or 2-phase
- CAN 2.0 data interface
POR (price on request)
SPECIFICATIONS
of the Control module ZET 7160-S
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Signal level | 5 V |
| Switch frequency | up to 200 kHz |
| No of connected step engines (drivers) | 1 |
| Data refresh rate | 1 Hz |
| No of control channels | 4 |
| Type of step engine | 4, 3 or 2 phases |
| Data interface | CAN 2.0 |
| Transmission rate | 100, 300, 1,000 kbps |
| OPERATIONAL SPECIFICATIONS | |
| Dimensions | 71×39×17 mm |
| Weight | 30 g |
| Power supply | 9 to 24 V |
| Consumed power | 0.5 W |
| Reverse polarity protection | yes |
| Operational temperature range | -40 to +100 °C |
| ELECTROMAGNETIC COMPATIBILITY, EMC | |
| IEC 61000-4-2, ESD | contact 4 kV, air 8 kV |
| IEC 61000-4-4, EFT | feed 0.5 kV, signal 0.25 kV |
| IEC 61000-4-5, Surge | 500 V |
OPERATING PRINCIPLE
of the Control module ZET 7160-S
ZET 7160-S is a step engine control digital unit with CAN 2.0 interface.
A step control signal is fed from the digital port. It determines the number of steps the step engine must be turned by, and the speed the step engine is to move with.
To implement a feedback, ZET 7160-E digital encoder may be used.
The ZET 7160-S step engine control unit can be used individually or as a part of automated measuring systems. The module control in the ZETLAB system is performed in the “Device Manager” program.
