Historical events view

This program is included into basic ZETLAB software set and enables representation and analysis of historical events registered by means of ZETLAB sotware for a long-term time span.

“View historical events” program is available in the “Register” tab of ZETLAB panel.

View historical events - location of the program

“Historical events view” has several sub-clauses:

  • Quick access menu;
  • A chart with selection of the recorded structures;
  • Coordinates for graphical representation of the events.

View historical events - main menu

Quick access menu

The menu contains a set of “hot keys” used for fast adjustment of “View historical events” program settings. In the figure below you can see the image of quick access menu.

View historical events - quick access menu

Data location

The key “Data location” allows you to select the directory to be used for storage of the recorded data. There are three options available:

  • Standard signals directory
  • User directory
  • Demo-server

View historical events - data loading method selection
Standard directory is set in the main menu of ZETPanel upon activation of the key “User configuration”.

View historical events - User path configuration
View-historical-events-User-path-configuration-2

In the case if “DEMO-Server” directory is selected, the data will be downloaded from ZETLAB server (this data has been recorded in the Company’s headquarters).

Upon selection of files directory there will appear a chart listing all the recorded data. The coordinates will depict the graphical data relating to corresponding signals.

View historical events - seismic monitoring

Channels selection

In order to select the data to be represented on the coordinates, one should enable “Select signals” option.

Upon activation of the key you will see “Signals selection” window consisting of:

  • charts with available and selected signals;
  • channels search field.

The selected channels will be depicted in the “Selection chart of the recorded signal” section of the program.

View historical events - channels selection menu

The table “Selected channels” depicts the channels that are selected by the user for further analysis in the coordinate network. The table “Available channels” depicts full range of channels, requested from the data server. For switching between the channels one can use the keys: « knopka2» and «knopka1».  In order to relocate the channel one should highlight it in the list and press corresponding key. To relocate several channels at once one can use “Ctrl” or “Shift” and the corresponding key.

The search field allows to find and highlight a channel or a group of channels in accordance with the particular request.

View historical events - channels selection menu - list of available channels

Display settings

The “Display settings” key activates the settings tab, in which it is possible to set the parameters of structures representation. It has several active sections:

  • Structures type – selection of particular structures to be represented on the coordinate network for further analysis;
  • Description by field – selection of value for Y axis (axis X always stands for the date of the recorded structure);
  • Highlight a field – selection of the field to be highlighted with color indication.

View historical events - display parameters configuration

In the case if it is necessary to depict a chart for each of the fields, one should check the “Separate chart for every field” check-box. As the settings changes are saved, the coordinate network and available channels section will depict a more detailed information of the selected data structure.

View historical events - visual representation of the data

Data analysis

“Data analysis” key activates a window for selection of the field to be analyzed.

View historical events - selecting the field for analysis

Upon activation of “Apply” key there appears a new window with graphical representation of the selected structure’s analysis results. Depending on the structure’s type there will be different graphical representation (e.g. a spectral pattern for a spectrum).

View historical events - GrammaViewer

Recorded structures table

The table is used for selecting the particular structures, signals records of which are to be depicted at the coordinate network. In addition to that, the table may also contain additional information of the selected structures.

View historical events - data structure table

In order to select a particular structure to be depicted at the signals record coordinate network, it is necessary to check the box located to the left from the structure’s name.In order to disable representation of a paticular structure, un-check the corresponding box.

In the case if it is necessary to depict all the structures at once, check the box to the left from “Structure name” section. Un-check the box to disable the function.

The “Color” tab is used to highlight the recorded signals structures in the coordinate network. Double-click the “Color” key next to corresponding structure. It will activate the “Color” window allowing the user to set the selected color by clicking “OK” key.

View historical events - color selection menu

Coordinate network

As the active structures have been selected, the coordinate network depicts corresponding data types. Each data type is displayed by a certain figure. The figure color is assigned by the user.

View historical events - coordinate network

Display area – is an area for active structures signals representation.
Horizontal scale – is a time scale depicting the time period during which active structures signals have been recorded. Vertical scale – is an amplitude scale of the value set in the “Display settings” option. In the mode of displaying all the events the vertical scale does not represent any values.
4 lines in the display area (2 horizontal and 2 vertical) are called markers. Marker can be moved around the display with the left mouse key. The horizontal markers are available only for viewing the selected records with pre-set values of vertical scale.

View historical events - coordinate network - 2

Amplitude and time information in the area of markers overlapping is displayed in the quick access menu.

View historical events - quick access menu options

If you want to change the data display in the coordinate network, right-click the display window – this will activate the dialogue window with available settings.

View historical events - grid settings

View historical events - display parameters

View historical events - colors and fonts

One more special feature of “Historical data viewer” is the possibility of representing the measured values with absolute tolerance in visual format, which, in some cases, is easier to analyse than textual or digital information.

The charts represent the measured value with tolerance limits for a given time span as well as dependence of the measured value on the selected parameter. The dependence is determined by color indication (its measuring scale is placed to the right from the diagram).

For instance, in the course of temperature measurements it is possible to see the value tolerance dynamics as well as humidity impact on temperature meters readings.

This option allows to display a 4-dimensional diagram in a common coordinate network.

View-historical-events-parallel-graphs-representation
View historical events - parallel graphs representation - 2