• Автор
    Тема
  • #79943

    christopher.bergenstein
    Участник

    Hello!
    Could you please help me with the following issue:
    As the data recording process is started, the data seem to be recorded to a file. However, as I try to reproduce the file, no data is displayed (I use the «Read» key for viewing the file).

Просмотр 1 ответа - с 1 по 1 (всего 1)
  • Автор
    Ответы
  • #79944

    Team
    Хранитель

    Hello!
    The program «Multi-channel oscillograph» is used to depict instant values of the signal for certain time interval. In the case if you record the file in the «Multi-channel oscillograph» program, then the file saves the instant values of signal’s readings, detected within the specified interval. The file has DTU format and contains textual information. It is impossible to view the file by means of «Signal viewing» program — for this purpose one should use «Results view» program.

Просмотр 1 ответа - с 1 по 1 (всего 1)

Для ответа в этой теме необходимо авторизоваться.

Авторизация
*
*

четыре + семь =

Регистрация
*
*
*

20 − 6 =

Генерация пароля

три × 5 =