Digital generator ZET 7160-G

  • Digital generator, 0/5 V, response time 1 ms
  • Signal duty ratio 0 – 100 %
  • CAN 2.0 data interface

POR (price on request)

SPECIFICATIONS

of the Digital generator ZET 7160-G

TECHNICAL SPECIFICATIONS
Signal level 5 V
Sampling rate 1 MHz
No of outputs 2
Data refresh rate 1 Hz
Signal duty ratio 0 to 100 %
Data interface CAN 2.0
Transmission rate 100, 300, 1,000 kbps
OPERATIONAL SPECIFICATIONS
Dimensions 71×39×17 mm
Weight 30 g
Power supply 9 to 24 V
Current consumed at 12 V voltage up to 40 mА
Reverse polarity protection yes
Operational temperature range -40 to +100 °С
ELECTROMAGNETIC COMPATIBILITY, EMC
IEC 61000-4-2, ESD contact 4 kV, air, 8 kV
IEC 61000-4-4, EFT feed 0.5 kV, signal 0.25 kV
IEC 61000-4-5, Surge 500 V
  • GENERATOR OPERATION MODE

    It is possible to start generators by an external impulse. The default value for generators can be set with an external signal

  • HARDWARE VERSIONS

    Standard: laboratory design in a plastic cover (green)
    ОЕМ: board covered with a sealing compound.
    Heavy Duty*: unit of standard design in an air-tight cover
    (with a transparent lid)
    *Optional

Pb_free
Directive 2011/65/EU (ROHS, ROHS II)

DIGITAL GENERATORS MEET THE REQUIREMENTS OF DIRECTIVE 2011/65/EU (ROHS, ROHS II) CONCERNING LIMITATION TO USE HAZARD SUBSTANCES (PB, HG, CD, CR(VI)) IN ELECTRICAL AND ELECTRONIC EQUIPMENT; THEY ARE MANUFACTURED USING LEAD-FREE METHOD, IN COMPLIANCE WITH THE EUROPEAN COMMUNITY REQUIREMENTS

RoHS-Comliance

Operating principle

of the Digital generator ZET 7160-G

ZET 7160-G is a single-channel digital generator capable of changing the duty ratio from 0 to 100%.

It can be initialized both by an external digital signal and by a command received via a CAN 2.0 network.

To connect the digital generator to ZETLAB and ZETVIEW systems, ZET 7174 (connection via USB) or ZET 7176 (connection via Ethernet) interface converter is used.

DIAGRAM OF CONNECTION TO A MEASUREMENT NETWORK

of Digital generator ZET 7160-G

The number of digital generators connected to the ZET 7174 interface converter shall not exceed 4.

The ZETLAB software supports connection of up to 200 units to a single computer. Control units can also be connected to any system via CAN interface.

Definition of output pins for connecting to CAN line
PIN NUMBERDefinitionMark
1+(9 ~ 24) VOrange
2H line of CAN 2.0Blue
3L line of CAN 2.0White-blue
4GNDWhite-orange

BASIC CONFIGURATION

of the Digital generator ZET 7160-G

ZET 7160-G комплектация

The basic configuration package of the generator includes:

  • Digital generator ZET 7160-G;
  • mounting panel for DIN molding for 71×39 plastic units;
  • operation documentation.

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).

EQUPMENT REQUIRED FOR MEASURING

Optional

ZET 7174
ZET 7174
Connection via USB

ZET 7176
ZET 7176
Connection via Ethernet

Корпус для защиты от влаги и пыли
Heavy-duty design
Moisture and dust resistant casing