Control module ZET 7060-S

  • Used for stepper motor control
  • Types of compatible stepper motors: 4-, 3- or 2-phase
  • RS-485 data interface

POR (price on request)

* Minimum order value: from 7 700 USD

Specifications

of Control module ZET 7060-S

Technical specifications
Signal level 5 V
Switching frequency up to 200 kHz
Number of connected stepper motors 1
Refresh rate 1 Hz
Number of control channels 4
Stepper motors types 4-, 3- or 2-phase
Data interface RS-485
Data rate 4800, 9600, 14400, 19200, 38400, 57600, 115200 bit/s
Parity control 0 – no control, 1 – control (oddity, ODD)
Data communications protocol Modbus RTU
Operational parameters
Dimensions 71×39×17 mm
Weight 30 g
Device power from 9 to 24 V
Power consumption 0,5 W
Polarity reversal protection yes
Operational temperature range from -40 to +100 °C
Electromagnetic compatibility EMC
MEK 61000-4-2 (IEC 61000-4-2), ESD contact 4 kV, air 8 kV
MEK 61000-4-4 (IEC 61000-4-4), EFT power 0,5 kV, signal 0,25 kV
MEK 61000-4-5 (IEC 61000-4-5), Surge 500 V
  • Product versions

    Standard: laboratory version – green plastic casing.
    OEM: compound coating
    Industrial*: standard module placed into leak-proof casing (transparent cover)
    *Option

Pb_free
Directive 2011/65/EU (ROHS, ROHS II)

STEPPER MOTORS CONTROL MODULES MEET THE REQUIREMENTS OF DIRECTIVE 2011/65/EU (ROHS, ROHS II) CONCERNING LIMITATION TO USE HAZARD SUBSTANCES (PB, HG, CD, CR(VI)) IN ELECTRICAL AND ELECTRONIC EQUIPMENT; THEY ARE MANUFACTURED USING LEAD-FREE METHOD, IN COMPLIANCE WITH THE EUROPEAN COMMUNITY REQUIREMENTS

RoHS-Comliance

Operating principles

of Control module ZET 7060-S

ZET 7060-S – stepper motor digital control module with RS-485 interface.

Digital port makes a signal for stepper motor control – a number of steps for stepper rotation and stepper motor speed is set.

For feedback communication can be used digital encoder ZET7060-E.

Stepper motor control module ZET7060-S can be used independently or within automated measuring system. ZETLAB system enables control of the module in the software “Device manager”.

Possibilities

of Control module ZET 7060-S

  • Start

    • Start of the engine by setting the number of steps
    • Start of the engine by setting the number of rotations
  • Modes

    • possibility of discrete sensor operation in the mode of terminal switch of initial/final position
    • output mode “0”- possibility of shaft rotation calibration in “0” position, terminal switch displacement adjustment
  • Settings

    • step number per rotation
    • stepper motor rotation speed
    • acceleration / braking response of stepper motor
    • stepper motor scale spacing
    • voltage decrease mode
    • stepper motor operational voltage
    • hibernation mode (motor winding voltage decrease)
    • discrete sensors type  (normally closed / opened)
    • discrete sensors de-bounce

Connection schemes

of Control module ZET 7060-S

Based on ZETSENSOR sensors and control modules distributed measuring networks, control systems and automated equipment complexes can be established.

In order to connect measuring lines to ZETLAB and ZETVIEW systems one can use  interface converter ZET 7070 (RS-485 ↔ USB) or ZET 7076 (RS-485 ↔ Ethernet). Measuring lines can also be connected to any system using Modbus protocol via RS-485 interface.

Control modules can be supplied together with ZETSENSOR sensors for establishing feedback communication.

Connection pins designation for connection to the line RS-485

Contact Designation Labelling
1 +(9…24) V Orange
2 RS-485 line «B» or «DATA-» Blue
3 RS-485 line «A» or «DATA+» White-blue
4 GND White-orange

The figure depicts stepper motor control system with feedback communication based on stepper motor control module ZET7060-S and digital encoder ZET 7060-E, connected to ZETLAB system. Stepper motor control is performed by means of signals from ZET7060-S module and via encoder, signal from which is processed by  ZET 7060-E module. Digital encoder signals processing and program control of ZET7060-S is performed by means of ZETLAB software.

Control module ZET 7060-S cover mini RS

Basic configuration

of Control module ZET 7060-S

Standard equipment

The delivery scope includes:

  • Control module ZET 7060-S;
  • DIN-rail mounting panel for plastic modules 71×39;
  • set of operational documentation.

POR (price on request)

* Minimum order value: from 7 700 USD

Order form - If you want to place an order or to make a request regarding technical specifications of particular product, fill out the form below:

Data protection notification

Please note that the personal data provided by you is used exclusively for the purposes of fulfilling our contractual obligations, including, but not limited to: issuing invoices, delivery documents, documentation relating to customs clearance process, etc. We do not provide your personal data to any third party except for the purposes relating to our direct contractual obligations. Upon completion of order processing and expiry of the warranty period for the Products provided by our Company, we do not store or process any of your personal data. Please note, that our Company’s Confidential policy does not imply any advertising or marketing activities with the use of your personal data (including your Company name, address, your E-mail, phone number and other information provided by you with a view to placing an Order and organization of the Delivery).

Necessary measuring equipment

supplied upon special order

Interface converter ZET 7076 Ethernet Wi-Fi RS-485
ZET 7076 interface converter
Ethernet connection

ZET 7060-E measurement module
ZET 7060-E
measurement module